How to Source 86 Inch Commercial Ultra-wide Android Screen: Product Selection Guide for System Integrators

An 86-inch ultra-wide Android screen is not a shelf-edge strip and it is not a video wall. It sits in between: a panel you mount along a gondola, a checkout run, a mezzanine fascia or a transport concourse wall, where one continuous row of content has to carry price, promotion and wayfinding at the same time. For a system integrator, that means the sourcing brief starts with geometry, not with a size chart. The checklist below is what we ask buyers to settle before they send us a quotation request.

1. Confirm the format before you confirm the size

Ultra-wide commercial panels are usually described by two numbers that integrators mix up in a specification sheet: the diagonal and the active area. On our 86 Inch Commercial Ultra-wide Android Screen, the documented active area is 2148.48 x 335.7 mm (V x H) with an overall body of 2158.3 x 348.5 x 82.2 mm. Two things follow from that. First, the housing adds roughly 10 mm to the length, so a fascia opening sized to the panel alone will not accept the bezel. Second, the depth is what clears a shelf bracket or a recessed channel — measure it against your substrate before you commit.

Do the same comparison across the family rather than assuming a scaling rule. The 88 Inch Commercial Ultra-wide Android Display shares almost the same length but is a much taller panel, and the 49.5 Inch Commercial Ultra-wide Android Screen is barely a third of the length. Length, height and pixel count move independently here, so ask for the active-area drawing for every candidate model in your quote request.

2. Read the pixel count as a layout constraint

On this format the resolution line tells your design team how many content slots fit in one row. The 86-inch model is listed at 1920 x 600 pixels, while the 88-inch and 49.5-inch models are documented at 3840 pixels across. A horizontal pixel count of 3840 lets you run several independent zones side by side without a seam; a lower count favours one wide message per row. Decide which your client's creative actually needs, because it changes the model, not just the artwork.

Brightness is decided by the light in the space, not by the size of the panel. The 86-inch unit is specified at 500 cd/m²; the 49.5-inch model at 1500 cd/m². A well-lit retail aisle and a daylight-flooded atrium glazing are different problems, so take a lux reading on site and put that number in your enquiry instead of asking for "the brighter one".

3. Decide how the player is delivered

Every screen in this series ships with onboard Android computing, which removes a media player from the bill of materials and one power supply from the installation. The 86-inch model's documented platform is a Rockchip RK3288 quad-core processor with 2GB memory and 8GB storage, plus 2.4G WiFi, Bluetooth 4.0, RJ45, TF slot and two USB hosts, running Android 5.1 and cooled without a fan.

That is enough for looping signage, scheduled content and lightweight interactive layers. It is not the place to run your client's own vision or analytics software. When the project needs more headroom, we integrate one of our Android digital signage media players behind the panel and route its cabling through the mount. Say so in the enquiry and we will quote the screen and player as one assembly with the correct cable lengths.

4. Match mounting and environment to the site

The installation options on this series are shelf-mounted, free-standing or a custom method we engineer for the enclosure. In practice that means brackets, a recessed fascia channel or a pole mount on a stand — and it is your choice, not ours, so send the mounting detail and a photo of the structure it attaches to.

Then state the environment in numbers. The documented operating range for these panels is -20 to 60°C with 5% to 90% humidity and a fanless enclosure, which covers indoor public areas, unheated lobbies and back-of-house aisles. A screen facing direct sun or weather belongs to another product line entirely — our outdoor digital signage displays are built with the enclosure, thermal management and brightness that an indoor panel does not have. Do not let a client talk you into putting an indoor ultra-wide screen on a forecourt.

5. Put the integration work in the same order

For a multi-site rollout, split the order into three line items on your purchase order: the panels, the mounting hardware, and the spare allocation for the sites with the highest uptime requirement. We support this as factory-direct OEM and ODM work — engineering through prototyping, production, quality control and technical support — so branding, bezel colour, cable routing and packaging can be fixed at the prototype stage instead of being negotiated after the first container.

Before you order in volume, buy one sample and mount it on a mock-up of your actual substrate. It is the only reliable way to check bezel shadow, cable exit, serviceability from the front, and how the content reads at the real viewing distance. Our OEM / ODM page explains what we need from your drawings to make that prototype match production.

What to send in the enquiry

• Site photos plus the opening or shelf dimensions, including available depth behind the fascia.
• Measured ambient light at the viewing position, and whether daylight reaches the screen.
• Content plan: one wide message per row, or several zones side by side.
• Onboard Android only, or a separate player for heavier applications.
• Quantity per site, total quantity, target install date and spare-part needs.

Send those six items and you will get a model recommendation with active-area drawings rather than a generic catalogue reply. Start from the product page or the contact form, and we will confirm configuration, lead time and pricing for your project.

Specification values quoted above are the ones documented on each product page; please re-confirm them on the model page you are quoting, since configurations can be customised.