Blog

Choosing 46.6 Inch Commercial Shelf Edge Android Screen: RFQ Preparation Guide for Project Buyers

Nov 22, 2026

A 46.6-inch shelf-edge Android screen sits at the far end of the retail bar-LCD range, where a single panel spans most of a gondola run. Before you send an RFQ for it, you need to settle four things: the exact glass and cut-out dimensions, how the screens will be networked and powered, which content platform will drive them, and what your store environment demands of the hardware. This guide walks through each, using the ZCDISPLAY 46.6 Inch Commercial Shelf Edge Android Screen as the worked example.

What this display actually is

A shelf-edge Android screen is a stretched, ultra-wide LCD bar with its own Android player on board. It mounts along the front edge of shelving or stands free on a counter, and it runs pricing, promotions and product content in place of paper labels and printed strips. The 46.6-inch model documented by ZCDISPLAY is the long-format member of that family: an IPS bar panel with a Rockchip RK3288 quad-core processor, built-in WiFi and Ethernet, and a content management player already on the board.

Two numbers define the purchase decision before anything else. The active display area is 1183.68 × 36.99 mm, and the panel resolution is 3840 × 120 pixels. That combination is what lets one screen carry a full gondola of price and promotion content instead of three shorter strips — but it also means your shelf run has to accept a bar of just over 1.2 m.

Dimensions: put these in the RFQ, not just "46.6 inch"

Bar-format displays are sized by glass, not by diagonal marketing labels. The product page lists an active area of 1183.68 × 36.99 mm and a physical dimension recorded as 1203.48 × 52.39 × 19 mm (vertical, horizontal, depth). Ask your supplier to confirm the outer housing dimensions in writing against the drawing you are working from, because the shelf bracket, end caps and cable exit all depend on that outer envelope rather than the active area.

In the RFQ, state:

  • The linear metre count of shelving per aisle category, so the supplier can propose a bar length instead of a single model.
  • Shelf edge thickness and profile — send a photo plus a calliper reading of the rail you will mount to.
  • Whether screens sit on the shelf edge, in a bracket, or free-standing on a fixture; the documented installation methods are shelf-mounted, free-standing and other custom methods.
  • Cable routing: where mains power and data reach each gondola, and whether you want daisy-chained runs.

Hardware configuration to specify line by line

The published specification for this model gives you a starting point; your RFQ should confirm or change each item rather than assume the base build fits.

ItemDocumented baselineWhat to confirm in the RFQ
Processor and memoryRockchip RK3288 quad-core Cortex-A17 1.8GHz, 2GB RAM, 8GB storageWhether your content (video loops, animated price changes) needs more headroom than the base build
Operating systemAndroid 5.1 with built-in CMS playerApp compatibility and whether you will use the supplied player or your own application
NetworkEthernet port, WiFi 2.4G 802.11b/g/n with antenna, Bluetooth 4.0Store WiFi band availability; how many screens per access point; static addressing or DHCP policy
I/OTF slot, RJ45, DC jack, WiFi antenna connector, 2 × USB hostWhether you need service access after installation, and whether local content loading is required
Brightness500 cd/m²Ambient light at the fixture — aisle lighting, skylights and window walls all change what reads clearly
PanelIPS LCD, 1000:1 contrast, 8 ms response, 178°-class wide viewingViewing angle relative to the aisle, and anti-glare treatment under overhead lighting
Thermal and environmentFanless, operating −20 to 60 °C, humidity 5–90%Cold-aisle or chilled-zone placement, dust load, and cleaning regime
PowerMains input 100–240V AC, 50/60HzRegional plug type, per-circuit screen count, and whether DC feeds are available at the fixture
Backlight life50,000 hoursDaily run hours in your trading pattern, and what happens after end of backlight life

The fanless design and the wide operating range matter more than they look on a datasheet. Shelf-edge screens sit at eye level in open aisles where dust, packaging fibre and cleaning spray reach them, and many stores run content overnight for replenishment. A sealed, fanless bar avoids the filter maintenance that a fan-cooled unit would add across hundreds of fixtures.

How this model sits against shorter shelf-edge options

Most deployments mix lengths: long bars on primary aisles, shorter bars on end-caps and promotional bays. The ZCDISPLAY catalogue carries a 35 inch Commercial Shelf Edge Android Screen at 878.4 × 48.19 mm active area with 2880 × 158 resolution, and a 47.1 Inch Commercial Shelf-edge Android Screen close to the 46.6-inch size band. The enterprise Commercial Shelf Edge LCD Series is documented as a unified series in which all sizes share one CMS platform, API set and mounting system — which is exactly the property you want when a store plan uses three different bar lengths.

Two practical consequences for the RFQ:

  • Ask for one platform across all lengths. Mixed platforms mean two content tools, two monitoring dashboards and two support paths.
  • Ask for a bill of materials that pairs bar length to shelf module width, so cut-offs at aisle ends are planned rather than improvised on site.

Integration: the part most RFQs leave out

Content and price data

State early who supplies the content platform. Options are the supplier's CMS player, your own Android application, or a third-party signage platform. Then define how price data reaches the screens: manual scheduling from a dashboard, or automated sync from POS/ERP through an API. Automated pricing is where shelf-edge displays earn their cost — a promotion change pushed to every fixture in minutes instead of a label-printing round across the store.

Network and monitoring

Specify how screens are addressed, grouped by store and zone, and monitored. Ask what happens when a bar goes offline overnight: does the platform report it, and can content be re-pushed without a technician visiting the aisle.

Mounting and installation

Fixtures are where projects slip. Confirm bracket compatibility with your shelving profile, whether brackets ship with each screen or separately, and how power and data jump between adjacent bars. If you are installing across multiple store formats, ask for a mounting standard drawing you can hand to your own installers.

Commercial terms to request

  • Pricing per length, in quantity bands, with the bracket set and power accessories quoted as line items rather than bundled invisibly.
  • A sample or pilot quantity for one aisle before full-store rollout, so you can test ambient readability and network load in a live store.
  • Warranty scope and the replacement route: whether a failed bar is swapped on site with a spare or returned for repair, and how long that takes.
  • Lead time per production batch and what happens to spares availability over the deployment life.
  • Customisation options — housing colour, front glass, bezel size, pre-loaded app, boot logo — and which of them change tooling cost or lead time.
Verify before you commit. Prices, minimum order quantities, lead times, warranty terms and certification scope are not fixed by the catalogue pages. Get each one confirmed in writing for your quantity and destination market, including which certificates apply where the screens will be installed.

A supplier checklist you can paste into the RFQ

  • Outer housing drawing with mounting hole pattern and cable exit position
  • Confirmed resolution, brightness and active area for the exact panel batch
  • Processor, RAM, storage and OS version as shipped, plus the update path
  • WiFi band support and antenna arrangement behind metal shelving
  • Bracket set matched to our shelf rail, with a sample fitted to our own rail
  • CMS platform name, licence model, API endpoints and documentation access
  • Pilot quantity for one aisle, with an agreed acceptance test for readability and uptime
  • Spare-parts plan across the rollout period

Where ZCDISPLAY fits in this purchase

ZCDISPLAY is a commercial display manufacturer supplying bar-format, kiosk, wall-mounted, embedded and outdoor hardware direct from its Shenzhen factory, with OEM and ODM support from engineering and prototyping through production and technical support. That matters for a shelf-edge project because length, housing and pre-loaded software are usually not off-the-shelf decisions — they follow your store plan. See the OEM / ODM page for customisation scope, the stretched displays category for the full bar-format range, and the retail digital signage solutions page for in-store application context.

Send a complete enquiry, not a size question. Include your aisle lengths and shelf rail profile, the content platform you intend to use, store network conditions, quantity per store and number of stores. The 46.6 Inch Commercial Shelf Edge Android Screen product page and the contact form are the right places to start; distributors can use the Become a Distributor page instead.