indoor kiosks: Questions to Ask Before Ordering
An indoor kiosk is one of those purchases that looks simple on a quotation and complicated on the shop floor. The screen arrives, the enclosure is fine, and then the software team discovers the board cannot run their application, or the installer finds the footprint will not pass through the store entrance. Before you issue a purchase order, work through the questions below. They are written for distributors, system integrators and project buyers who specify indoor kiosks on behalf of end clients.
1. What will the kiosk actually be asked to do?
Start with the job, not the hardware. A directory screen in a mall lobby and a self-ordering terminal beside a counter place very different demands on the same category of product. Write down the interaction you expect a customer to complete, then match it to the form factor: a free-standing tower for wayfinding and information, a compact floor unit or countertop touchscreen for order capture, a double-sided cabinet when the kiosk also has to sell to the people walking past it.
Ask your client how many transactions an hour the unit must handle. Continuous public use rules out consumer-grade panels and pushes you toward commercial-grade enclosures, hardened glass and a compute platform that will not throttle after an afternoon of touch input.
2. Android or Windows, and who writes the software?
This is usually the deciding question. If your client already runs a Windows application — a legacy POS package, a hospital check-in system, an in-house queue manager — the kiosk needs a PC-class board with the same operating system. If the application is Android or web-based, an Android platform is lighter, quieter and typically easier to update remotely.
On ZCDISPLAY's indoor range both paths are documented. The Android models ship with a Rockchip RK3288 quad-core Cortex-A17 1.8GHz processor, 2GB RAM and 8GB storage expandable by TF card, running Android 5.1 or later. The Windows models use a Celeron J1900 quad-core 2.0GHz board with 4GB RAM, a 128GB SSD and Windows 10 — see the 32 Inch Commercial Windows Capacitive Touchscreen Kiosk for that configuration. Confirm the exact CPU, memory and storage on the model page you are quoting; configurations differ between sizes and series.
Then ask who is responsible for the application. If nobody is, that gap will surface after delivery, not before.
3. Which touch technology suits this location?
Two options dominate indoor kiosks. Projected capacitive touch gives a smooth, phone-like response and a flat sealed front that is easy to wipe down — the right choice where hygiene and appearance matter, such as food service or clinics. Infrared touch sits in the bezel rather than in the glass, tolerates gloved fingers and improvised input well, and makes it simple to keep the display area open for peripherals.
Compare the two on site: ZCDISPLAY documents both approaches at the same screen size in the 32 Inch Commercial Windows Infrared Touchscreen Kiosk and the capacitive model linked above. Decide by user behaviour, not by cost per unit.
4. What does the site require physically?
Send the installer's measurements to the supplier before production, not after shipping. Relevant items:
- Floor space and footprint, including clearance for a cabinet that is deeper than it looks.
- Free-standing or wall-mounted installation — several models support both, and the mounting hardware differs.
- Where the mains socket is, how the cable will be routed, and whether a lockable compartment is needed to keep the public away from ports.
- Ambient conditions. The indoor range is documented for an operating temperature of -20 to 60°C and 5% to 90% humidity, which covers air-conditioned lobbies and unheated entrances, but a sunlit atrium or a kitchen pass is a different conversation.
- Brightness. Panel brightness on these models is documented at 350 cd/m², comfortable indoors; a bright lobby with direct daylight may need a different specification agreed in advance.
5. Which peripherals must be built in?
A kiosk rarely stays a screen for long. List every device the workflow needs and confirm each one against the model's I/O before ordering: receipt printer, card reader, barcode scanner, QR module, camera, contactless payment terminal, document scanner. Check the number of USB host ports available, where the peripherals will be mounted inside the cabinet, and whether the supplier has already integrated that device on a previous build. On the Windows units the I/O set documented on the product pages is compact — RJ45, DC jack, WiFi antennas and USB host ports — so plan the hub and cable routing deliberately.
6. How will content and software be maintained?
Ask how the unit will be updated after commissioning. All of these kiosks support Ethernet plus WiFi, which allows remote content refresh across a store network instead of someone walking a USB stick around the building. Ask also about fanless operation: the indoor models are documented as fanless, which matters in quiet environments and reduces the dust and maintenance problems that moving parts create over several years of service.
7. Can the supplier change the product?
Standard cabinets solve most projects; some do not. If your client needs a different colour, a printed panel, a custom mounting arrangement, a specific bezel cut-out for their own hardware, or a branded enclosure, ask directly whether the factory supports that work. ZCDISPLAY presents OEM and ODM manufacturing covering engineering, prototyping, production and quality control, which is the route for custom commercial display projects. Establish at enquiry stage whether your requirement is a catalogue order or an engineering job, because the lead time and the paperwork differ.
8. What does the quotation actually include?
Before you compare prices, make sure you are comparing the same package:
| Item to confirm | Why it matters |
|---|---|
| Unit price and quantity breaks | Distributors and integrators order at different volumes; ask for the tiered structure rather than a single number. |
| Packaging and freight terms | Kiosks ship as bulky cabinets. Freight method and packaging protection change landed cost materially. |
| Warranty scope and duration | Confirm what is covered, how replacement parts are supplied and who supports the field. |
| Spare parts | Agree in advance whether you hold spares for a deployed fleet or order them as needed. |
| Certification documents | Your market, your client's procurement team or an inspector may ask for them at any time. |
| Lead time and production slot | Custom builds start only after drawings are approved; a standard model can move sooner. |
Pricing, minimum order quantities, lead times and warranty terms should be confirmed in writing with the supplier for your specific configuration. Do not assume they carry over from another project.
9. What happens when something fails on site?
Ask which components are modular and field-replaceable, whether the panel, board and power supply can be swapped without dismantling the whole cabinet, and how quickly replacements reach your country. For a deployment of several units, agree in advance who diagnoses the fault and what evidence — photos, logs, serial number — the factory needs to act. This question costs nothing at enquiry stage and saves an unplanned site visit later.
A short pre-order checklist
- The job the kiosk performs is written down, with expected transaction volume.
- Operating system chosen against the client's existing software.
- Touch technology chosen against user behaviour and cleaning needs.
- Site measurements, mounting method and ambient conditions sent to the supplier.
- Every peripheral listed and confirmed against available ports.
- Content update path agreed for after commissioning.
- Catalogue order versus custom engineering clearly identified.
- Freight terms, warranty scope, spares and certifications stated in the quotation.
Once those answers exist, specifying a kiosk becomes routine. Browse the indoor digital signage kiosks range on the ZCDISPLAY site to see available sizes and configurations, or send your application, size, mounting and quantity details through the contact form for a quotation matched to the project.
Tell us the location, the interaction you need and the volume. As a commercial display manufacturer working with distributors and integrators, ZCDISPLAY will quote a configuration rather than a catalogue line — and flag anything that needs engineering before production starts.